AP |
Wi-Fi Standards |
802.11 ax/ac/b/g/n |
WI-FI |
AP Type |
Mesh, dual radio, 5GHz and 2.4GHz 802.11ax 2×2 MIMO |
Wi-Fi 6 (802.11ax) Features |
UL/DL-OFDMATarget Wake Time (TWT)Spatial Frequency Reuse (BSS Coloring) |
Radio |
2.4 GHz 802.11 ax/ac/b/g/n client access radio5 GHz 802.11 ax/ac/b/g/n client access radio |
Max aggregate frame rate |
Max aggregate frame rate: 1.8 Gbps
2.4GHz: 574 Mbps
5GHz: 1201 Mbps
|
Supported data rates (Mbps) |
802.11b: 1, 2, 5.5, 11
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40), 400 with 256-QAM
802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2, VHT20 to VHT80), 1,083 with 1024-QAM
802.11ax (2.4GHz): 3.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40)
802.11ax (5GHz): 3.6 to 1,201 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE80)
|
Supported frequency bands (country-specific restrictions apply) |
Supported frequency bands (country-specific restrictions apply)
2.412-2.484 GHz
5.150-5.250 GHz (UNII-1)
5.250-5.350 GHZ (UNII-2)
5.470-5.600, 5.660-5.725 GHz (UNII-2e)
5.725-5.850 GHz (UNII-3)
|
Supported Channels |
Available channels dependent on configured regulatory domain
2.4GHz: 1-13
5GHz: 36-64, 100-144, 149-165
|
MIMO |
2×2 SU-MIMO
2×2 MU-MIMO
|
Radio Chains and Spatial Streams |
2×2:2 streams SU/MU MIMO 5GHz
2×2:2 streams SU/MU MIMO 2.4GHz
|
Channelization |
802.11n high-throughput (HT) support: HT20/40
802.11ac very high throughput (VHT) support: VHT20/40/80
802.11ax high efficiency (HE) support: HE20/40/80
|
Security |
WEP, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 – Personal, WPA3 – Enterprise, WPA3 – Enhanced Open (OWE)
Personal PSK
EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
|
Wireless Security |
Real-time WIDS/WIPS with instant alerting
|
Supported radio technologies |
802.11b: Direct-sequence spread-spectrum (DSSS)
802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
802.11ax: Orthogonal frequency-division multiple access (OFDMA) with up to 8 resource units
|
Supported modulation types |
802.11b: BPSK, QPSK, CCK
802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM (proprietary extension)
802.11ac: BPSK, QPSK, 16 QAM, 64-QAM, 256-QAM, 1024-QAM (proprietary extension)
|
Beamforming |
Transmit Beamforming and Maximal Ratio Combining
|
Mesh |
SON based Mesh
|
RADIO MANAGEMENT |
Antenna Optimization |
Polarization Diversity with Maximal Ratio Combining (PDMRC)
|
Wi-Fi Channel Management |
Intelligent Radio Resource Management (iRRM)
|
Client Density Management |
Adaptive Band Balancing
Client Load Balancing
Airtime Fairness
Airtime-based WLAN Prioritization
|
RF PERFORMANCE |
Antenna |
2.4GHz omni-directional antennas with 3 dBi peak gain
5GHz omni-directional antennas with 6 dBi peak gain
|
Peak Transmit Power (Tx port/chain + Combining gain) |
Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements)
2.4 GHz band: 26 dBm
5 GHz band: 25 dBm
|
Transmit power |
Configurable in increments of 0.5 dBm
|
PERFORMANCE |
Maximum number of associated client devices |
Up to 256 associated client devices per radio
Up to 512 clients per AP
|
Maximum number of BSSIDs |
16 BSSIDs per radio
Up to 31 per AP
|
NETWORKING |
IP |
IPv4, IPv6, dual stack
VLAN Pooling
Port-based
|
VLAN |
802.1Q (1 per BSSID or dynamic per user based on RADIUS)
VLAN Pooling
Port-based
|
802.1x |
Authenticator & Supplicant
|
Tunnel |
L2TP
GRE/EoGRE
Openvpn
L2TP/IPSEC
|
Policy Management Tools |
Application Recognition and Control
Access Control Lists
Device Fingerprinting
Rate Limiting
Integrated Layer 7 firewall with mobile device policy management
Flexible guest access with device isolation
|
Quality of Service |
WMM Access Categories with DSCP and 802.1p support
QoS-based scheduling
Directed Multicast
L2/L3/L4 ACLs
|
Mobility |
802.11r for fast Layer 2 roaming
Centralized Layer 3 roaming
|
PHYSICAL INTERFACES |
Ethernet (WAN) |
1x 10/100/1000 BASE-T Ethernet (RJ45) · LLDP
|
Ethernet (LAN) |
2x 10/100/1000 BASE-T Ethernet (RJ45) LLDP
|
DC Power |
1x DC power connector
|
Reset Button |
Reset to the factory default settings
|
Indicators |
One multi-color status LED
|
PHYSICAL |
Physical Size |
19.8 cm (L)
19. 8 cm (W)
4.1 cm (H)
|
Weight |
700 g
|
Mounting |
Desk
|
ENVIRONMENT |
Operating temperature |
-20~45 °C
|
Humidity |
5%~95% non-condensing
|
Storage Temperature |
-0~70 °C
|
Storage Humidity |
5%~95% non-condensing
|
POWER |
DC Adaptor (12V, 2.0A, 24W) |
12 W
|
WARRANTY |
Limited Lifetime Warranty |
BOX CONTENTS |
Power Adaptor
Ethernet Cable
Quick Start Guide
|